2
www.blaubergventilatoren.de
Box-D
CONTENTS
Safety requirements
Purpose
Delivery set
Designation key
Technical data
Fan design
Mounting and operation guidelines
Connection to power mains
Technical maintenance
Storage regulations
Manufacturer's warranty
Acceptance certificate
Seller information
Connection certificate
Warranty Card
р. 2
р. 3
р. 3
р. 3
р. 4
р. 5
р. 6
р. 9
р. 9
р. 9
р. 12
р. 14
р. 14
р. 14
р. 15
SAFETY REQUIREMENTS
Disconnect the fan from power mains prior to any installation, setup, maintenance and repair
operations.
The fan must be connected by an expert qualified for unassisted operations with electrical
installations up to 1,000 V after being made familiar with the present technical certificate.
Prior to installation check for any visible damage to the impeller, casing and grille.
Also check the casing flow channel for any foreign objects which may damage the impeller
wheel blades.
The fan may only be used as intended. No modifications or alterations are allowed.
The fan is not intended for operation by children or any persons with reduced physical, mental
or sensory capacities, lacking practical experience or knowledge unless controlled or briefed
on the device operation by the person responsible for their safety.
The fan may not be used to handle air containing highly flammable substances or vapours
such as alcohol, petrol etc.
The fans take
220-240
V 50/60 Hz single-phase alternating current.
Children being supervised not to play with the appliance!
Disconnect the damper from the power supply (electric mains) prior to any work on the unit.
Power mains connection shall only be performed by a qualified electrician. The nominal electrical
parameters of the fan are given on the manufacturer's label. Any tampering with the internal
connections is prohibited and will void the warranty.
Take the necessary measures to prevent penetration of smoke, carbon monoxide and other
combustion products into the spaces through open smoke ducts or other fire-safety
infrastructure as well as prevent back flow of gases from any appliances which produce gas
flame or naked flame.
The transported air must not contain dust and other solids as well as sticky substances and
fibrous materials.
The unit is not intended for operation in environments with high concentrations of highly
flammable substances or vapours such as alcohol, petrol, insecticides etc.
Do not close or block the inlet and outlet openings of the unit to ensure optimum air flow.
Do not sit on the unit or put any objects on top of it. The unit owner must follow this manual.
