11
10
Posture Belt & Posture Harness - User Instructions
Using a harness:
•
Do the bottom straps up first ensuring the harness
is away from the user’s neck.
•
Do the top straps up by clicking the male buckle into the
attached female buckle of the harness.
•
Adjust the top straps by pulling the ‘D’ loop forward
and down whilst holding the shoulder of the user in
the desired position.
For Belts & Harnesses, always make sure that:
•
Straps are not twisted.
•
Buckles are adjusted so that when they are fastened together there is no slack in the strap.
•
Buckles are fully locked together.
•
Each end of the belt or harness is still securely attached to the seating system or wheelchair.
•
Buckles or webbing do not show signs of excessive wear –
if you are concerned about the condition of any items contact the Wheelchair Service.
Cleaning
These items should be wiped clean using a damp cloth using only a mild detergent.
(PLEASE DO NOT use bleach or products containing bleach).
A soft brush can be used to remove heavier soiling.
Safety Instructions
Blatchford posture belts and harnesses are designed to provide postural support and are
intended to be used as part of a specialised seating system. The belt or harness should be fitted
to the seat and adjusted at the time of delivery. Replacements must only be fitted by Blatchford
or a Wheelchair Service representative.
Important Safety Warnings
POSTURAL HARNESSES AND BELTS ARE NOT DESIGNED TO BE USED AS
SAFETY DEVICES AND MUST NOT BE USED AS VEHICLE RESTRAINTS FOR USE IN
TRANSPORTATION.
A suitable, separate, 3-point passenger seat belt (fastened into the vehicle) must be used
to secure the seated occupant during travel in order to provide protection in the event of an
accident. The seatbelt should have both pelvic and upper body sections, with the upper section
fastened into the vehicle at the upper level. This should be in accordance with Medical Device
Report –
Guidelines for transporting children in special seats.
ALWAYS CHECK THAT THE BELT IS A SNUG FIT. CHEST BELTS SHOULD ALWAYS BE
FASTENED AROUND THE OCCUPANT’S BODY AND UNDER THE ARMS. IT IS NOT
INTENDED THAT THE ARMS SHOULD BE INCLUDED WITHIN THE BELT.
If the hip belt is incorrectly adjusted there is a risk of the wheelchair occupant slipping down in
their seat and could result in occupant’s upper body and neck coming into contact with the belt.
If you are unsure about any of these instructions or if you are worried about the
adjustment of the belt contact your Wheelchair Service.
Moulded Sandals & Footstraps - User Instructions
Moulded Sandals and Footstraps are designed to provide support and control in
conjunction with any seating arrangement.
Do:
•
Ensure that straps are not twisted.
•
Ensure that buckles are adjusted so that when they
are fastened, there is no slack in the strap.
Care
Check that buckles and straps do not show signs of excessive wear or fraying - if you are
concerned about the condition of any item refer to your seating technician at the clinic or through
your supplier as soon as possible.
Cleaning
These items can be wiped clean using a damp, soapy
cloth. A soft brush can be used to remove heavier soiling.
Warning
THIS DEVICE IS NOT DESIGNED FOR USE AS PART
OF A SAFETY RESTRAINT SYSTEM FOR TRAVEL IN A
VEHICLE.
