Blata Minibike 2.5, Руководство пользователя, Страница: 6 / 16

UNPACKING AND BASIC CONTROLS:
The Minibike is packed and delivered with folded handlebars and levers
mounted on them. After unpacking, set up the handlebars in such a function
position that will suit you best. However at maximum handlebars turning, the
brake levers must not bump into the lining. After setting - up the handlebars,
tighten the nuts 1 on handlebars sleeves, the brake levers 2, and acceleration
handle 3 acc. to Fig. 1.At tightening, don´t use an excessive force in order not
to damage the parts or threads, or to distort the tubes, and the like. Verify the
smooth and perfect movement of operating bowden cables of acceleration and
both brakes.
Fig. 1
Basic controls:
1. Handlebars nut
2. Brake lever bolts
3. Acceleration handle screws
4. Stop switch
5. Front brake lever
6. Rear brake lever
SAFETY
Minibike is not allowed to be used on public roads, as it doesn´t comply with
valid Safety Standards. It is forbidden to ride even where the traffic of larger
vehicles is possible. Minibike is intended for a drive on closed tracks with
even smooth and dust-free surface.For your own and other people´s safety
keep all advices and recommandations, how to use your minibike in a correct
and thoughtful way. serious injuries can result from unsafe operation of this
and other vehicles. You have to minimize the risk by wearing Safety
Equipment e. g. : safety helmet, goggles, gloves, guards of elbow and knees,
firm footwear.
BEFORE STARTING
Regarding the engine life time it is important the minibike to be well run - in as
this fact will manifest itself by the power output and life of engine. The
minibike is considered to be run - in after consuming five full fuel tanks by
riding. For brake-in period we use mixture of petrol and 2-stroke synthetic oil
in the ratio 30 : 1. After brake-in the petrol octane no. 91 or higher and 2-stroke
synthetic oil are mixed in ratio 50 : 1. Mix up throughly the mixture of fuel and
oil before pouring it into the tank. During brake-in don´t increase the engine
speed to maximum and don´t allow the overheating. Check the tire inflation
which should correspond to the driver ´s weight. The pressure in one wheel
has not to exceed 2,5 bar in the front and rear wheel.
1 1
3
5
2
4 2 6
3