14
It’s important to keep the “wings” sharp. They can be sharpened in the same way like the other blades.
Efficient and fast work can be reached by using correct blades and settings. During work the blade will become
dull. When the blade is dull it is necessary to sharpen or replace it.
Having a second cutting head will be helpful, and it
will save you important time and money.
When the machine is running on the second set of tools, the first set can be serviced.
Different parameters of coat or material will require the use of different blades. For example a small blade is
perfect for the hard job. But when the material is soft you can use wide blade. The best solution is to start with
a narrow blade and during work change it to a wider one if this is possible.
Working place should be kept clean. When some part of material is removed on the first run, it is always better
to clean the floor before starting the second run. Debris and dirt can make the blade dull really quick.
Always wear protective, cut-resistant gloves before handling the blades!
Sharp blades can cause serious injury!
Blade changing
Dull blades greatly reduce cutting ability. Re-sharpen or replace as needed.
- Always wear protecting cut-resistant gloves when changing the blades.
- Use an extended wrench to keep hands safely away from the edge of
the blade.
- Make sure the main plug is pulled out of the power source before
changing the blades.
Wings
