Blastrac BMP-265, Руководство по эксплуатации

Страница: 20 / 22

20
8. Technical data
BMP-265E
3x400V
BMP-265E 3x230V BMP-265B
Power consumption 5.5 kW 5.5/6.4kW 6 kW
Electrical connection / fuel
3x400V
50 Hz
3x230V
50/60Hz
Combustion engine
Unleaded petrol
Amperage / lubricant 10.5 A 10.4 SAE 10W-30
Working width 265 mm 265 mm 265 mm
Rotation speed drum 1440 min -1 1330/1560 min -1 1440 min -1
Length 1260 mm 1260 mm 1260 mm
Width 500 mm 500 mm 500 mm
Height 1160 mm 1160 mm 1160 mm
Weight 175 kg 175 kg 190 kg
Noise emission level (Under load)
Uncertainty
96 dB(A)
5 dB(A)
96 dB(A)
5 dB(A)
96 dB(A)
5 dB(A)
Sound power level (Under load)
Uncertainty
115 dB(A)
5 dB(A)
115 dB(A)
5 dB(A)
115 dB(A)
5 dB(A)
Vibration level (Hand-arm) 5.1 m/s² 5.1 m/s² 6.3 m/s²
Ambient temperature -5°C ~ 40°C -5°C ~ 40°C -5°C ~ 40°C
Dust hose connection Ø75 mm Ø75 mm Ø75 mm
Suitable filter unit
Contact Blastrac BV
We will assist you with a good advice
Design and specifications are subject to change without notice by Blastrac BV.
IMPORTANT NOTES:
Noise and vibration measurements were taken during heavy operation on concrete. The noise and vibration
levels depend on the working depth, which is in turn determined by the unevenness of the surface. The impact
force of the tools onto the surface is the biggest factor in both noise and vibration levels.
The indicated values are measured on new machines. Noise and vibration levels will vary in different
circumstances. Area influences like open outside or closed inside space, ambient temperature, different
surfaces to be treated, daily use, different tools or accessories, poor maintenance, etc. will give different
values at all time and could increase the exposure level over the total working period.
The declared vibration and noise emission levels represent the main applications of the machine. The values
may be measurements from a representative sample of technically comparable machinery. The values may be
used for a preliminary assessment of exposure.
A precise estimation of the level of exposure to vibration and noise should also take in account the times when
the machine is switched off or even running, but not actually in use. This may significantly decrease the
exposure level over the total working period.