BL-183 / BL-233 SANDER/POLISHER
SECTION 4
ADDITIONAL SAFETY RULES
INSTRUCTION MANUAL
OCTOBER 2008
Check the machine visually for any
damage
and
defects
at least once a day!
In the event of
operational malfunctions
, the machine must be
shut down
immediately
and secured, and the fault must be rectified!
Carry out the switch on and switch off operations in accordance with the
operations manual!
Do not switch off, or remove the exhaust, and/or the ventilation devices while the
machine is running!
a) Use clamps or other practical ways to secure and support the workpiece
to a stable platform.
Holding the work by hand or against your body is
unstable and may lead to loss of control.
b) Maintain tools with care. Keep cutting tools sharp and clean.
Properly
maintained tools, with sharp cutting edges are less likely to bind and are
easier to control.
c) Check for misalignment or binding of moving parts, breakage or parts,
and any other condition that may affect the tools operation. If damaged,
have the tool serviced before using.
Many accidents are caused by poorly
maintained tools.
d) Use only accessories that are recommended by the manufacturer for
your model.
Accessories that may be suitable for one tool, may become
hazardous when used on another tool.
a)
Tool service must be performed only by qualified repair personnel.
b) Service or maintenance performed by unqualified personnel could result in
a risk of injury.
All persons in the proximity of the machine must wear ear
protectors and safety shoes. In addition, the machine operator
must wear close fitting protective clothing.
