Blastrac BGS-250-115V-V2, Руководство по эксплуатации

Страница: 4 / 19

4
3. Safety
It is important that all persons who are working with or maintaining machine read the manual carefully and
understand it fully.
Keep this manual with machine, to refer to at any time.
Safety precautions
 Persons who are not operating the machine must not be permitted in the surrounding area of machine.
 The surface to be treated must be swept clean to remove stone, screws, etc.
 Make sure that there are no cables or hoses in the driving direction of the machine. Remove any
trailing electrical cables or hoses from the surface to be treated to avoid the risk of tripping.
 Make sure there is no standing water on the surface to be treated.
 Do not get distracted during operation.
 Always use a dust collector when operating.
Safety regulations
 Do not change anything on the machine. Always use cables which are approved and grounded,
including extension cables. The machine is always equipped with a grounded connection, do not
change and always use grounded cables with a grounded plug.
 Connect the main power supply cable to an installation with a grounded leakage circuit breaker.
 Inspect and test the electrical components regularly. The electrical components have to satisfy the
requirements which apply to these components.
 Always call a skilled electrician or your distributor when you have questions about the safety of the
electrical components.
 Work on electrical equipment or operating materials may only be undertaken by a skilled electrician or
by trained persons under the guidance and supervision of a skilled electrician as well as in accordance
with the electrical engineering regulations.
 Disconnect the main plug during inspection, maintenance, disc change and/or repairing the machine.

Never use machine in rain.
 Machine contains rotating parts, so always leave the diamond disc on the floor while the motor is
turning.
The following sticker is placed on the machine.
Meanings of these symbols are:

Ear protection is obliged

Safety glasses with lateral protection are obliged

CE-mark on this machine

Safety shoes obliged

Consult the manual before operating the machine
Personnel must tie back long hair and not wear loose clothing or jewellery including rings.
Wear gloves and dust mask during operation of machine.
Safety instructions

Disconnect main plug during inspections and repairing machine.

Keep machine original, only use original Blastrac parts.

Do not pull out the power supply cable by the wire, use the connector to unplug.