Blastrac BDC-66DBP, Руководство по эксплуатации

Страница: 8 / 13

8
4. Before operation
Before using the machine it is essential to inspect the machine.
It is not permitted to use the machine if the machine safety is not according the checkpoints below.
Checkpoints of electrical safety
§
Use only extension cables for extending the main cable that are sized and marked in accordance with
the overall power consumption of the machine.
§
Electrical cables must be rolled entirely off of the reels.
§
Any damage to electric cables is not permitted
§
Use an electrical power supply connection with earth connection.
§
The main switch of the machine should be put to ‘Off’ before connecting to the power supply.
5. Operation
Starting / stopping the machine
· Connect the dust hose to the machine.
· Connect the dust collector to the power supply.
· Switch on the main switch.
· Switch on first the compressor motor.
· Secondly switch on the fan motor.
· Carry out this actions in opposite sequence to stop the machine.
Work with the machine
· Regular check the contents of the dust-bin.
· Regular open the drain valve to remove water from the air tank.
Interrupting work
· When temporarily interrupting the work (1/2 hour – 1 hour), turn off the fan unit only. Pulse cleaning
of the filter system will continue and will increase the life-time of the filter cartridges.
· During a longer stand still of the dust collector, first switch off the fan unit. Let the pulse cleaning cycle
run for +/- 5 minutes. Switch off the compressor unit and Main-switch.
· Disconnect the power-supply cable.
· Close silencer when the machine is not working, so there is no change that water can get in.
· Prevent unauthorized persons from getting access to the dust collector or take measurements to
prevent unauthorized working with the equipment.
1 Compressor ON/OFF
2 Fan motor ON/OFF
3 Emergency shut down
4 Power socket
5 Power ON/OFF – main switch