Blastrac 500 E Global, Руководство по эксплуатации

Страница: 32 / 108

Operating Instructions 500 E Global
General
14
Side seal system:
The side skirts and brushes are fixed to each side seal box with a
plate and four screws. To replace them: unscrew the screws and
remove the side skirts and brush and replace them if necessary.
Fig. 3.10
1 Side brush
2 Side skirt fixing plate
3 Side skirt
4 Seal box (blast housing)
5 Side seal spring
6 Side seal spring plate
7 Side seal
Method of installing side seals:
It is necessary to lift one side of the machine at a time to enable the
seals to be put in place from the bottom. This is achieved as follows:
1.
Check that power to the machine is on.
2. With the directional controls in central position (neutral) press
drive start button.