background image

3

blastking.com

FEATURES

• 

Dual Channel 31 Band Graphic Equalizer

• 

1/3 Octave Bands

• 

Adjustable High Pass Filter Circuit 12Hz to 285Hz

• 

Switch - Selectable Cut or Boost of Either 6dB or 15dB

• 

10 Segment Two Color LED Meter Displays Indicating 0 Vu To 4dBu

• 

XLR Input and Output Connections

• 

1/4” TRS Input and Output Phone Jacks

• 

Switchable Power Supply 110 - 220 VAC

FRONT PANEL

Displays power on or off

1

POWER LED

The individual equalization faders adjust the gain or loss at each 
filter frequency. There are 31 of these faders per channel on the 
ULTRAMIX3102-EQ. By adjusting a combination of faders, an overall 
frequency response can be developed and the physical position of 
the faders will give an approximate visual indication of this response.

2

EQUALIZATION

The gain control adjusts the overall gain of the equalizer when 
the EQ switch is “in”. It is generally used to compensate for level 
changes due to the equalization process, but can also adjust overall 
system level and gain structure. Overall gain with this control is from 
+6dB to -∞.

3

GAIN

2

1

3

6

7

5

4

On the ULTRAMIX3102-EQ, a 10-segment, two color LED level 
meter indicates the output level of the equalizer. A Clip indicator LED 
illuminates when any point in the equalizer signal path reaches a 
level within 3dB of clipping.

4

LEVEL METERS

This switch selects the operating range of the individual equalization 
faders between 15dB and 6dB. The 15dB settings should be used 
when this much equalization is needed. The 6dB setting allows finer 
resolution on the fader settings.

5

RANGE SWITCH

This switches the Graphic Equalization and gain adjustments, 
allowing the effect of any equalization to be compared to a “flat” 
response. This switch does not defeat the High-pass filter.

6

EQ BYPASS SWITCH

The high-pass filter can be used to supplement the frequency 
response achieved by the bandpass filters. Its function is to “roll off” 
the response below a given frequency eliminating subsonic inter-
ference like wind noise or floor rumble. This frequency is adjustable 
between 12Hz and 285Hz.

7

HIGH-PASS FILTER 

2

Содержание ULTRAMIX 3102-EQ









Отзывы: