6
Rear panel features
110
PLA12
1
Audio Input (XLR Female) - Balanced
2
Audio Input (1/4” Female) - Balanced
3
Mic/Line – Press IN when using a microphone.
Press OUT when using a mixer.
5
Audio Output (RCA) Left and Right
8
Sig – Signal Indicator – When illuminated, there
is a signal to the audio input.
6
Satellite Out – Use this to link subwoofer with
the column speaker.
9
Clip – Clip Indicator – When illuminated, the
signal level is clipping. The volume should be
reduced if light is solid and not blinking.
7
Power – When illuminated, the unit is set to on.
10
Flat/Boost – Press IN for boosted frequency
response Press OUT for flat frequency
response.
11
Volume Control – Turn clockwise to make volume louder. Turn counter
clockwise to make volume lower.
4
Audio Output (XLR Male) – Balanced. Output
is in parallel with audio input and can be used
when connecting another amplifier.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
13
Power Switch – Press to the right for on. Press to the left to turn the
unit off.
12
Voltage Switch - Factory setting at 110V. Instructions to switch to
220V available upon request.
14
Fuse
15
AC Power Input – Use with included power cord.
