Blankom IRD-6100, Руководство пользователя

Страница: 40 / 45

BLANKOM IRD-6100 HD IRD User Manual
BLANKOM_IRD-6100_User_Manual_RR-V1.1-03-2018.doc - 40 -
 Making sure good ventilation for the heat-sink on the rear panel and other heat-sink slots if
necessary
 Checking the input AC voltage whether it is within the power supply working range and the
connection is correct before switching on the device
 Checking the RF output level varies within tolerant range if it is necessary
 Checking all signal cables have been properly connected
 Frequently switching on/off device is not recommended. The interval between every switching
on/off should be longer than 10 seconds.
Conditions need to unplug power cord
 Power cord or socket damaged.
 Any liquid flowed into device.
 Any stuff causes circuit short
 Device in damp environment
 Device was suffered from physical damage
 Longtime idle.
 After switching on and restoring to factory setting, device still cannot work properly.
 Maintenance needed
Chapter 6 Packing List
BLANKOM IRD-6100 HD IRD 1 piece
User Manual (optional download from Websites) 1 piece
Power Cord for AC Input IEC 1 piece
ASI BNC-cable 1 piece
As a
Multicast capable Switch
we recommend is the HP (ARUVA) 2530 24G or 48G.
(For Floor switches we have an own branded one and support IGMP as well) IGMP should be set to
ON in the port configs. The latest HP Firmware might not be the best choice. Better to test IGMP
functions before installation into a HOT running System and eventually do a downgrade of the
Firmware. This one works: