IGS-900 16 DVB Tuner to IP-Out
Author: Ralf Riedel
April 15, 2018
Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2018-03RR
Page 22
Safety and other recommendations:
Assure climatic environment rules for electronic machines like this, Grounding rules as well.
Installation should be done by a certified electrician.
Caution:
Before connecting power cord to Tuner to IP Gateway, you should set the power switch to
“OFF”
.
Do not connect the RF-cable (F-plugs) when the unit is running.
Important Notes!
This manual is for use by qualified personnel only. Handling this device or system requires special
electronic technical knowledge. To reduce the risk of electrical shock or damage to the equipment, do
not perform any servicing other than the installation and operating instructions contained in this
manual unless you are qualified to do so. This device operates in the given voltage and frequency
range without requiring manual adjustment.
Do not open the top case w/o unplugged power source because serious injury or death may be the
result! Inside are components under risk from electrostatic discharge. To avoid equipment damages
do not touch these components or, observe the respective handling rules!
For continued protection against fire, the fuses may only be replaced by identical fuses with the same
electrical specifications which are designed for the corresponding fuse positions.
No part of this publication may be reproduced in any form or by any means or used to make any
derivative work (such as translation, transformation or adaptation) without the written permission
from Blankom / IRENIS GmbH.
IRENIS GmbH reserves the right to revise this publication and make changes in its content from time
to time, whereby it shall not be obligatory for IRENIS GmbH to provide notification of such revision or
change.
IRENIS GmbH provides this manual without warranty of any kind, neither implied nor expressed, this
includes also any warranties regarding the merchantability and fitness for a particular purpose.
IRENIS GmbH may improve this manual or make changes in the products described herein at any
point of time.
Installation Notes
All types of the IRENIS-BLANKOM family are 19“devices with 1 RU height designed for installation in
19” racks. In addition to the front panel screws an internal module support is required at the rack.
Depending on the Frontend used and the operating adjustments, the RF-input port carries
DC Voltage (13V /18V, max. 400 mA).
By connecting a mains cable, the device can become functional without any auxiliary appliances. The
power supply units are designed for the wide range of 100-230V AC; a manual adjustment of the
voltage is not necessary.
For some models the second power connector is feeding another independent power supply for
internal redundancy. For a maximum of redundancy both power supplies should use different circuits.
All the outputs are decoupled from one another. Thus, the circuit does not have any effect on the
functioning of the device. Connections that are not required need not to be terminated.
Suggestion:
CAT 6E Ethernet cable for GbEthernet
