3
EMA x08/407
Part N
o
: 917x.xx
ENCODER/ MULTIPLEXER
SDI/ A/V
→
ASI(TS) & IP(TS)
HDMI
→
ASI(TS) & IP(TS)
A
LINE
1. Installing and operating instructions
1.1 Safety instructions
• When assembling and commissioning the EMA and executing the settings, always follow the accompanying instructions
exactly.
• The devices are not to be assembled and brought into use by anybody who is not an authorised technician.
• When components are being installed in areas where reception is important, ensure that EMC regulations are observed.
• All assembly, installation and cable connection must take place when no electricity has been connected.
• The provisions of DIN EN 50083 must be observed at all times when working with the equipment. In particular,
DIN EN 60728-11 [1] regarding safety may on no account be ignored.
• The devices come under protection classification I. It is absolutely necessary, therefore, to insert the mains plug into a fused
socket.
•
Warning
Connecting external video sources of which the mass has a different potential from that of the EMA device may cause “wow”
(avoided by matching the potentials or isolating them from each other).
1.2 Contact
If there are any questions or problems, help is available from:
BLANKOM Antennentechnik GmbH
Hermann-Petersilge-Str. 1
07422 Bad Blankenburg
Germany
Phone:
+49 (0) 3 67 41 / 60-0
Fax:
+49 (0) 3 67 41 / 60-100
Service hotline: +49 (0) 7000 / BLANKOM
+49 (0) 7000 / 252 65 66
e-mail:
web:
www.blankom.de
