Headend overview table (Button)
“Edit”
Die Bedienoberfläche des jeweiligen Moduls wird geöffnet
und es können Einstellungen vorgenommen werden.
“Copy (data page)”
The “Copy (data page) of the desired module will be processed. It displays
all adjusted parameters and can be saved/stored.
(Store/save within Internet Explorer: “Data/File”
“Save target at/as”)
The menu “All” enables the processing of a copy/data page for the entire
Headend system.
The “Copies/data pages” will be stored/saved with a new forma and are NOT
downwards compatible. These can not be used with the HCB 100 module types
(9650.01 / 9650.02).
®
NOTICE:
“ON / OFF”
“Status”
A menu with “ON”, “OFF” or “RESET” will be displayed
- Selecting “ON” or “OFF” allows you to change the operation status of the
desired module
- Selecting “RESET” will disconnect/switch off the desired module for 8 seconds.
The operating status of the desired module will be called up and displayes.
“Ouput attenuation”
Selecting “Output attenuation” enables you to change the output level of the
desired module.
The Headend overview table (Button)
.
Following functions can be selected:
displays all the modules of the
entire Headend system with various configurtion buttons
GmbH
a
b
ANTENNENTECHNIK
- Selecting the button “Headend read out” effects a Scan of the entire Headend system including all
connected modules.
- Selecting the button “check-out” occurs an automatic log out of the headend system
- Selecting the button “Selection” gets you to the selection menu of the headend system.
11
Hermann - Petersilge - Straße 1
D-07422 Bad Blankenburg
Phone: ++ 49 (0) 36 74 1 / 60 - 0
Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
BLANKOM Antennentechnik GmbH
·
·
·
Germany
