6
Tip
If your oven is located below your cooktop, the cooktop's thermal safety measures for-
bid the simultaneous use of the cooktop and the pyrolysis program of your oven.
Your cooktop is equipped with an anti-overheating safety device.
This safety can be activated, for example, when the hob is installed over an oven that is not
sufficiently insulated. If this occurs, a series of small lines appear in the control panel. In
this case, we recommend that you increase the ventilation of your hob by creating an ope-
ning in the side of your cabinet (8 cm x 5 cm)
and/or that you install the oven insulation kit
(reference 75X1652) that is available from the Post-Sales Service Department.
Warning
You must ensure that the air intakes located under your cooking appliance remain
clear at all times.
This induction cooktop requires adequate supply of cool air to function. The base of the
cooktop must have direct unrestricted ventilation to the room where the cooktop is instal-
led. Ensure you follow the installation instructions detailed below.
•
•
BUILD-IN
ABOVE A CUPBOARD OR DRAWER UNIT
The positioning must allow a fresh air intake and air outlet.
ABOVE AN OVEN
The positioning must allow a fresh air intake and an air outlet of 4 mm minimum
Your appliance can be easily integrated above a cabinet, a built-in oven.
For all types of installation, your induction hob needs proper ventilation.
1
1 / INSTALLING YOUR APPLIANCE
EN
20mm min
20mm min
4mm gap
4mm gap
10mm gap
10mm gap
Airflow
Airflow
Minimum clearances and ventilation requirements
Minimum clearances and ventilation requirements
for cooktops installed above an oven
for cooktops installed above a cabinet or drawers
2 X 50mm
holes an be
cut into each
side wall of the
cabinet
for additional
cool air intake
2 X 50mm
holes can be
cut into each
side wall of the
cabinet
for additional
cool air intake
Top of drawer or cabinet.
Oven
Bevel the face opposite
the air vents to allow
air to exit the vents.
Bevel the face opposite
the air vents to allow air
to exit the vents.
