Blanco BOSS382X, Руководство по установке

Страница: 13 / 30

13
2 INSTALLING YOUR EN
with 3 conductors of 1.5mm2 (1 live + 1 n earth) which
must be connected to a 220-240V~ single-phase grid by
means of a 1 live + 1 neutral + earth IEC 60083 standard power
socket or via an all-poles cut-off device in compliance with the
installation rules.
Warning :
If the electrical installation in your residence
requires any changes in order to hook up your appliance,
contact a professional electrician.
If the oven malfunctions in any way, unplug the appliance or
remove the fuse corresponding to the sector where the oven
is hooked up.
The safety wire (green-yellow) is connected to the
appliance’s terminal and must be connected to the earth
terminal of the electrical set-up.
You must enable the appliance to be disconnected from the
supply network after installation.
Disconnection can be enabled by ensuring that there is an
accessible power plug or by incorporating a switch into the
fixed wiring in compliance with the installation rules.
The fuse in your set-up must be 10 amperes.
If the power cable is damaged, it should be replaced by the
manufacturer, its after-sales service department or a
similarly qualified person to avoid danger.