9
SETTING THE MINUTE TIMER
1
1..
Touch TIME pad.
2
2..
Enter the amount of time you wish to set the timer for by touching the number pads. Digit time is in minutes
and seconds and set left to right. Set one digit (eg. press 5 for 5 seconds) or up to four digits (2405 for 24
minutes, 5 seconds).
3
3..
Touch POWER pad.
4
4..
Touch number pad 0 (TIMER).
5
5..
Touch START pad.
NOTE:
Touch TIME and then touch CANCEL to cancel TIME during timing process.
SETTING COOKING TIMES WITH POWER LEVELS
A
A..
O
On
ne
e--S
Stta
ag
ge
e C
Co
oo
ok
kiin
ng
g
1
1..
Touch TIME pad.
2
2..
Use the number pad to set a cooking time. You can set a cooking time from one second to 99 minutes
and 99 seconds. If you are setting a time greater than one minute, you must enter numbers for both
minutes and seconds.
F
FO
OR
R E
EX
XA
AM
MP
PL
LE
E::
To set 20 minutes, enter 2, 0, 0, 0.
3
3..
If you want to set a power level other than 100% power, touch POWER, then use the number pads to enter
the power level. You can set the power level from 1 to 9 (see scale below).
4
4..
Touch START to start cooking.
USE THESE SINGLE DIGITS TO REPRESENT OVEN POWER LEVELS
Number pad 9
8
7
6
5
4
3
2
1
0
% of Power
90%
80%
70%
60%
50%
40%
30%
20%
10%
TIMER
B
B.. T
Tw
wo
o--S
Stta
ag
ge
e C
Co
oo
ok
kiin
ng
g
Some recipes require different stages of cooking at different temperatures.
1
1.. S
SE
ET
T S
ST
TA
AG
GE
E 1
1:: Follow steps 1-3 in "One-stage Cooking". DO NOT TOUCH START PAD.
2
2.. S
SE
ET
T S
ST
TA
AG
GE
E 2
2:: Touch MEMORY pad, touch TIME then use the number pad to enter the STAGE 2 cooking
time. Touch POWER then use the number pad to enter the STAGE 2 power level. (Most 2 stage recipes
use lower power for second stage).
3
3.. T
To
ou
uc
ch
h S
ST
TA
AR
RT
T p
pa
ad
d..
NOTE:
The respective lights will come on to indicate which stage the oven is operating in. After total time has
elapsed, 3 beeps sound. After a cooking or defrosting program has completed, the oven will automatically
continue to sound three beeps every two minutes until the door is opened or the CANCEL pad is touched.
PRE-SET FUNCTION
Suppose you want to set the oven to start-up at 2 o'clock.
1
1.
Touch PRE-SET pad.
2
2..
Touch 2, 0, 0 on number pad.
3
3..
Set the cooking time(s) with power levels for one or two stage cooking (refer above).
4
4..
Touch START pad.
5
5..
Touch CANCEL to cancel the pre-set function.
NOTE:
Be sure the clock is set at the correct time of day before programming the PRE-SET function.
30 Litre Operation Manual 2007.qxp 12/07/2007 3:00 PM Page 9
