1
4
Fitting the machine undercounter
If you wish to fit your machine undercounter, check whether
you have sufficient space under your countertop and whether
the wiring-plumbing is suitable to do so.
1
If you decide that
the space under the countertop is suitable for fitting your
machine, remove the worktop as shown in the illustration.
2
Warning:
The stand part which we will settle our machine
under it by removing its worktop has to be stable in such a
way not to allow balance disorder.
To remove the worktop, remove the screws that hold the
worktop which are located at the rear of the machine; then
push the front panel 1 cm from the front side towards the rear
and lift it.
If the appliance is installed on a carpet floor, take care that
the openings in its base are not obstructed.
Содержание BDW3458X
Страница 1: ...Dishwasher Instruction Instruction Instruction Instruction Manual Manual Manual Manual ...
Страница 23: ...Alternative basket loads Lower Basket Top basket 22 ...
Страница 24: ...Faulty loads 23 ...
Страница 36: ...52168623 R20 0 ...