Electrical installation
The power supply must meet the specification on the product.
The transformer is designed to be used with either a weatherproof
switchbox cable connector or connected to the fixed main system
by means of plug and socket.
The cores in the supply cable are coloured in accordance with the following code:
Brown – Live, Blue – Neutral
.
The electrical cable is permanently connected and sealed in the transformer body.
If the supply cable is damaged the transformer must not be used.
Do not use the supply cable to lift the transformer as this may cause damage.
WARNING:
A Residual Current Device (RCD), also known as the Residual Current
Circuit Breaker (RCCB), with a tripping current not exceeding 30mA
must be installed in the supply circuit. A means of disconnection from
the supply having a contact separation of at least 3mm in all poles
must be incorporated in the fixed wiring.
INSTALLATION
For permanent installations to the mains supply, it is necessary to conform to the regulations
of the local electricity authority and this would include the use of metal or plastic conduit to
protect the cable.
Attention has been drawn to the fact that special rules may exist concerning the installation
of your transformer (i.e. local building regulations).
Always disconnect the mains electricity supply whilst the equipment is being installed
repaired, maintained or handled. Consult a qualified electrician if in any doubt about the
wiring of this product to the main supply
WARNING:
This transformer must not be used in ponds. For external use only.
4
17.729 Blagdon_LED Light set Instructions_AW.indd 7
07/09/2017 12:41