BLADEZ PTS68 Master Bike, Руководство пользователя

Страница: 12 / 22

ASSEMBLY INSTRUCTIONS
Step three
Insert the seat post (42) into the seat tube on
the frame. Attach the seat(1) into seat slider (41).
Insert the seat slider (41) into the seat post (42).
Using knob (4) adjusts and tightens the height in
the desired position.
Step four
Attach the pedals (11) into the crank arms (5)(7),
each pedal is marked with L (left) (turn counter-clockwise)
or R (right) (turn clockwise) to the side of the stationary
bike they are on. Note - the right hand crank is on the
same side as the belt guard (24). Be careful to align
the threads correctly to avoid damaging them.
Applying a little grease on the threads will help the
pedals to screw in easily and correctly, tighten using a
15mm wrench; both pedals should tighten towards the
front of the stationary bike. Mount the water bottle
holder(29) using the screws (30) and
washers (30-1) provided. Now fasten the console(58)
to the enter left side of the handlebars and
connecting the upper control cable to the lower
control cable.
4
41
42
1
11
(30)(30-1)
24
5
7
29
58
10