Bladez Corp. • 20155 Ellipse • Foothill Ranch, CA 92610 • (866) 325-2339 • www.ebladez.com
Page 7
PACKAGE CONTENTS
Your Bladez MOBY XS comes with the following items in the box. Please locate all
of the following:
1. The Bladez MOBY XS Power Board
2. Allen Wrench
3. Spark Plug wrench
4. Product Handbook
GETTING STARTED
Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your Power Board.
Unfolding
1. Carefully remove the MOBY XS from the
box.
2. To unfold the MOBY XS, begin by
pulling up on the FOLDING HANDLE
with one hand (Fig. 1), while gently
pulling up on the handlebars with the
other.
3. Fully extend the handlebars to their
upright position until you feel the
mechanism lock into place. (Fig.2)
Attaching The Handlebars
1. When you take the MOBY XS out of the box,
you will need to attach the handlebar to the
scooter. Remove the billet stem cap using
the Allen wrench provided. Place the
handlebar into the groove by lining up the
hole with the screw in the billet stem. (Fig. 3)
2. Replace the billet stem cap and tighten down
the bolts to secure the handlebar. (Fig. 4)
