BLADEZ Jetbike GSX, Руководство пользователя, Страница: 19 / 23

19
RESISTANCE ADJUSTMENT:
To provide an even level of exertion during exercise, this bike is equipped with a tensioning
controller (75)[refer to page 14 image].This provides various exertion settings when turned
clockwise. To increase pedal resistance, turn the tensioning control clockwise (+) until the
exertion level best suits your exercise requirements. To reduce pedal resistance, turn the
tensioning control counterclockwise (-).
During exercise the flywheel will get hot due to the braking effect, so when you have finished
exercising it is advisable to set the tensioning control to minimum in order to help stop the
brake shoe from hardening.
Important: This tensioning control is equipped with an emergency braking system which,
when applied with force produces a much sharper braking effect.
HOW TO LEVEL THE BIKE
There are 2 knobs under the rear stabilizer. Adjust the knob when the bike is not level with
the floor.
BELT ADJUSTMENT
The belt on your bike has been pre-adjusted and should not require immediate attention.
Continuous use of the bike may cause the belt to stretch or become loose causing the need
for bike adjustments. If so, simply loosen the bolts on both side of flywheel and tighten the
nylon nut until the belt becomes tight.
ADJUSTING THE SEAT HEIGHT
Loosen the saddle post adjustment knob (19b) on frame slightly by turning it
counterclockwise, move the saddle to a position comfortable for doing exercise and then
tighten the adjustment knob (19b) securely by turning it clockwise.
HORIZONTAL ADJUSTMENT OF THE SEAT
Loosen the knob (19a) on seat post slightly by turning it clockclockwise. Move the saddle
to a position comfortable for exercise and then tighten the knob securely by turning it
clockwise.
TROUBLESHOOTING