BLADEZ E-LITE 250, Руководство по продукту

Страница: 12 / 17

Page 12
To Inflate the Tires
1. Remove the valve stem cover and expose
the valve stem (Fig. 8).
2. Using a standard bicycle pump, inflate the
tires to 50 PSI and replace the valve stem
cover.
The Bladez E-Lite uses an identical rim and
tires assembly on the front and rear wheels,
which means that the tires can be rotated.
The wheels are actually two wheel halves
(split rim) bolted together to make it easier
to remove and replace the tire. Empty all
air from the tire, prior to loosing the bolts to
split the rim.
Tire wear will differ based on rider weight, riding conditions and care. Replacement tires
can be obtained at your local Bladez dealer, through motorcycle shops, or from the
Bladez website at
www.ebladez.com . The Bladez E-Lite uses a standard Kenda 7.5"
(2.00 x 50) pneumatic tire.
Tire Pressure
The tire must be inflated to a maximum of 50 P.S.I. . It is also recommended to use a
tube additive like Slime purchasable from any motorcycle shop, to avoid inconvenient
punctures.
CHAIN CARE
Proper chain care will increase the life and improve performance of your Power Board.
Always keep the chain lubricated and tightened to proper tension.
Lubrication
Always keep the chains lubricated with a good chain spray or grease (not chain wax). If
the chain is allowed to run dry for a prolonged period of time it will fail, and the life of the
chain is severely shortened.
Chain Adjustment
The chain on the E-Lite should be adjusted from time to time. The chain should be tight
enough not to skip, but have a little bit of play. If you feel your chain skipping or make a
popping noise, adjust the tension immediately.