12
13
27. Install the tail rotor blade onto the
hub using a 1.5mm hex driver. Make
sure the tail rotor is mounted in the
correct orientation.
28. Mount the gun pods onto the
fuselage. Support the inner mount
with your fingers and press the gun
assembly into the fuselage. You
may want to use a small drop of
thin CA to position and hold the guns
in place.
29. Use a small piece of tape to tape
the rear tail section together at the
seam that was used to mount the
tail motor mount.
30. Install the main rotor head back onto
the main shaft and replace the pin.
31. Mount the new main rotor blades
included with the Huey body.
32. The battery pack will mount to the
battery plate all the way forward to
the front of the nose for balance.
