EN
4
The ST-10+ LED indicator show the status of the battery,
Wi-Fi connection and GPS connection.
The Wi-Fi and GPS LEDs fl ash while the ST-10+ establishes
a connection. When the connection is made, the LEDs glow
solid.
Touchscreen Layout
LED Indicators
Volume Down
Volume Up
Live Video Display Area
Navigation Buttons
Telemetry Values
Telemetry Values
Selected Model
Clock
Battery Capacity
Menu
Home
Back
Battery Installation
The ST-10+ is shipped from the factory with the 3.6V
5200mAh Li-Ion battery installed. If you should need to
replace the battery at any time, use the following installation
instructions:
1. Remove the battery cover.
2. Connect the battery lead to the ST-10+, noting polarity,
as shown.
3. Install the battery, label facing up, making sure the pull
tab is accessable.
4. Replace the battery cover.
CAUTION: RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO STATE AND
LOCAL LAW.
Battery
Wi-Fi
GPS
