7
Connect your Shadow Ghost directly to your internet Box / Router, with an Ethernet cable.
If you do not use an Ethernet connection, you will have the option later during the
setup to connect to a Wi-Fi network.
It is not recommended to use a BPL (broadband over power line) connection for your Shadow ghost.
Once you’ve plugged everything in, you can turn on your Shadow Ghost by pressing the Shadow Ghost’s
power button for 2 seconds, until the red LED below lights up to indicate power up.
Shadow will initialise, it may take a minute or two, please do not turn it off or restart it.
Connect to the internet
Turn on your Shadow Ghost
Turn on
Turn off
Back to Shadow options screen
Press for 2 seconds until you see the red
LED appear
Press for 6 seconds until the red LED turns off
Quick press
2
3
WIFI 5 GHZ
ETHERNET
