Blade 2013 LADY FAT, Руководство пользователя

Страница: 8 / 19

11 12
To ReConneCT:
• Pull the safety line towards you until you can grab the bar.
• While holding QR slider in the open position, place the bullet
pin in the chicken
loop slot of the QR.
• Let the QR slider move down to its locked position.
The slIdeR QuICK Release sysTem
The Slider QR System is important for releasing power in an uncontrolled kite
and emergency situations. The newly designed system is made from composite
plastic for longer lasting, corrosion free, and simple functionality. When activated
while the leash is connected to the safety ring alone, the kite will lose all power
and drop, remaining attached by one of the center flying lines. Always check the
mechanism before attempting to launch. This device has a limited lifetime, and
it is recommended to change the mechanism after 400 hours of kiting. Rinse the
system in fresh water after every session.
To aCTIvaTe:
• Grab the yellow colored release slider.
• Force it up towards the bar.
• Once the QR is activated, let go of the system.
donKey dICK
The control system is designed with a finger that prevents you from accidentally
detaching from the kite.
Before attempting to connect the loop and finger to your harness, make sure you
have properly set your lines and attached them to the kite without any tangles
or twists.