B: Gain Parameter 2 Value (H2, B
– Tail Rotor Gain)
L: Gain Parameter 3 Value (H3, L
– Filtering Adjustment)
R: Gain Parameter 4 Value (H4, R
– Motor Power)
Inflight Vibration Analysis for Telemetry-Enabled Transmitters
Enabled=Fore/aft servo moves several times.
Disabled=Fore/aft servo moves once then returns to center.
Once enabled, the Flight Log Screen on your telemetry-enabled transmitter will show:
F: Current Vibration Level (1
–9999)
A: Maximum Vibration Level (1
–9999)
B: Current Roll Attitude Estimate
L: Current Pitch Attitude Estimate
R: Current Yaw Attitude Estimate (resets to 0 when the stick is at the stop position)
Use this function to compare vibration levels on your model before and after making changes, such as balancing
main rotor blades, replacing a bent main shaft, etc. The vibration level numbers are not calibrated to a vibrational
acceleration level, but are meant for comparison purposes. For example, if the vibration level decreases after
balancing the main rotor blades, you will have at least some data indicating the rebalancing was successful.
©2014 Horizon Hobby, LLC.
Blade and the Horizon Hobby logo are registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with
permission of Bachmann Industries, Inc.
Patents pending.
Created 5/14
45217
