Introduction To the Connection between Watch and Mobile Phone
1
. Download and install APP (H Band)
Scan the QR code on the box or the built-in QR code on the watch via the mobile browser program
to download. Downloading needs WIFI network or data traffic. Install it after downloading, open the
APP after the installation, and give the software corresponding rights which are needed for Bluetooth
connection. (
Note: H Band supports IOS9.0 or later and Android6.0 or later
)
(H Band QR Code)
2. The way to connect the watch to the phone (same for iOS and Android)
Turn on the Bluetooth of the mobile phone, and then open the H Band on the mobile phone desktop
(
Figure 1
). You can choose to log in without an account or register with an account. After the
successful login, go to the home page. On the home page, click the red part "not connected" to the
Bluetooth search interface (
Figure 2
). Select the corresponding device (X1) and click to connect.
Wait for a few seconds, it will prompt the watch to make a Bluetooth pairing request with the mobile
phone. Please allow Bluetooth pairing. This completes the pairing connection between the mobile
phone APP and the watch (
Figure 3
). Then, it will ask if you want to upload data to the cloud (
Figure
4
). This operation can be selected by yourself. Clicking NO or YES will enter the connection success
interface and synchronize the data once (
Figure 5
). (
Note: The sync data function is automatically
uploaded every 30 minutes. If you turn on the automatic heart rate monitoring function, the heart rate
is tested once every 10 minutes and then uploaded to the APP.
)
4
