Blackview Tab 11 Series, Руководство пользователя

Страница: 2 / 10

Safety- In order to ensure safely using
the product, you must strictly abide by
the following rules
The pad should be at least 15 cm away from any
medical implant or rhythm adjuster and never put the
device in your coat pocket.
Do not expose the device and other batteries together
with the high temperatures or heat-generating equipment
such as sunlight, heaters, microwave ovens, ovens or water
heaters. Overheating of the battery can cause an explosion.
When charging is complete or not charging, disconnect
the charger from the device and unplug the charger from
the power outlet.
If the device is equipped with a non-removable battery,
do not replace the battery yourself to avoid damaging the
battery or device.
Use of an unapproved or incompatible power source,
hazards.
Do not disassemble or reset the battery, insert other objects,
immerse in water or other liquids to avoid battery leakage,
Do not drop, crush, scratch or puncture the battery to
avoid subjecting the battery to excessive external pressure,
resulting in internal short-circuit and overheating of the
battery.
The company does not bear the responsibility for accidents
caused by non-standard related charging equipment.
If you want to read the full CE accompliance, please check
this link: http://www.blackview.hk/ce/
Maintenance
Thoroughly understand the maintenance of this pad to
use the pad more safely and effectively, and extend the
service life of the pad as much as possible.
Please follow the instructions in the manual to open the
pad, disassemble the accessories, and do not try other
methods.
Please avoid falling, knocking or shaking your pad. Rough
handling of the pad can cause the screen to rupture,
damaging the internal circuit board and the delicate structure.
Do not use chemical solvents or detergents to clean your
pad. Wipe the pad case with a soft cotton cloth dampened
with water or a mild soap.
Clean the lens with a clean, dry, soft cloth.
(Example: camera lens) and display.
If you encounter an abnormal image such as a crash during
use, the processing method is as follows: For a pad that
cannot remove the battery, please press and hold the
power button for more than 12 seconds, the pad will be
forced to restart (unlock the pad when restarting)
It can solve the general bug; for the pad that can remove
the battery, please remove the battery, then insert the
battery and restart it to solve the bug.
When the charger is not in use, please unplug it from the
power outlet. Do not connect the battery that has been
fully charged to the charger for a long time, as overcharging
will shorten the battery life.
English
7
Take out the card slot and place the Nano card or Nano card
and TF card with the metal side facing down. Make sure the
bevel angle is aligned with the bevel angle of the card slot
and placed in the corresponding card slot.
To make sure your pad be able to call, put the
SIM card in the following order.
Press the card pin into the side hole and then the card
tray pops up and pull out it.
With the pad facing up, insert the card holder into the
pad in the direction of the arrow.
SIM 1 SIM 1
SIM 2
SIM 1 SIM 1 SIM 2
Charger/Type-C