28
2. Press DELETE and choose the type of zone you want to store.
3. Press STORE to confirm your choice.
Adding an Average Speed monitoring section
(SPECS zone)
Store an average speed monitoring area only if you are absolutely sure of
the start and finish points. When passing underneath the first ‘start’ SPECS
camera carry out the following:
1. Press STORE once to store the first camera position.
2. Press DELETE to select the location type: AVERAGE.
3. Press STORE to confirm.
4. When you are underneath the finish camera, press STORE to confirm
the finish position.
The section of average speed detection is now stored.
If you press STORE by mistake, you have the option to cancel by
pressing the MENU button.
Protecting and Cleaning
Cleaning the case and screen
Your unit is made from tough polycarbonate moulded plastic and is
designed to withstand normal daily handling. Only clean with a dry or
slightly damp cloth. Do not use solvents or a wet cloth. When cleaning the
LCD display, avoid pressing too hard as this may damage the display.
General precautions
Avoid water or very damp conditions, extremes of heat (60ºC) or cold
(-10ºC) and dropping the unit. We recommend removing ROAD ANGEL
COMPACT and its bracket from the dashboard if the vehicle is parked for
long periods in direct sunlight.
