background image

3

INTRODUCTION

Dear Customer,
Thank you for purchasing this compressor 
which has passed through our extensive quality 
assurance processes. Every care has been taken 
to ensure that it reaches you in perfect condition.  
However, in the unlikely event that you should 
experience a problem, or if you require any 
assistance please do not hesitate to contact us;

If you have a problem, call customer service 
do not return this compressor to the place 
of purchase.

CUSTOMER SERVICE

Australia:  

1300 660 457

New Zealand:  

0800 474 876

Operating times:  Monday – Friday  
   

8.30am - 5.30 pm 

Australian Eastern Standard Time (AEST)

EXPRESS WARRANTY STATEMENT 

- COMPRESSOR GROUP

You are not required to do anything to register 
your compressor purchase.  Please attach the 
purchase receipt to this manual and ensure both 
are kept safe.  We hope you enjoy your new 
compressor, and if you have any problems call 
customer service on the above phone numbers.  
Do not return to place of purchase.
Smart Marketing Group Pty Ltd (SMG) 
warrants that this compressor will be free from 
manufacturing faults or defects for 12 months 
from the date of purchase, providing original 
purchase receipt is kept and shown when needed 
and is subject to the terms and conditions below.

What is covered.

• Manufacturing fault or defect.

How to claim under this warranty.

• Call customer service, phone number at the top.
• Ensure you have the following: Original 

purchase receipt, Model of compressor. Serial 
number of compressor.

• Discuss the issue.
• Customer service will advise which authorised 

service agent to take the compressor to provided 
the issue is a warranty one.

• Take compressor to authorised service agent 

for repair.

What is not covered.

• Commercial use of compressor.
• Use of compressor in a commercial premises.
• Damage or deterioration due to transport.
• Damage caused by negligence, misuse, abuse 

or accident.

• Any corrosion or rusting.
• Damage caused by incorrect set up and start up.
• Replacement parts due to general wear and tear.
• Compressors with serial number defacement, 

modification or removal.

• Compressors which have been serviced by other 

than an authorised SMG service agent.

• Compressors with no original purchase receipt.
• Compressors which have been on sold, not 

original purchaser.

• Damage due non-servicing of compressor as is 

required by this manual.

• Blockages / damage caused by dust, dirt, 

spiders webs or insects.

• Damage caused by the incorrect fitting  

of accessories.

• Damage caused by overloading, overworking 

the compressor.

• Damage to attached equipment or third party 

accessories.

• Damage caused by attached equipment or third 

party accessories

Содержание BRC155





















Отзывы: