4
BLACKRIDGE
1HP AIR INFLATOR
BLACKRIDGE
1HP AIR INFLATOR
5
Before using the air inflator it should be carefully checked to determine that it will
operate properly and perform its intended function.
Check for the correct alignment of moving parts ensuring that they
do not bind.
Check for broken or missing parts.
The air inflator should be set up near to the user.
Check any other condition that may affect the operation of the
air inflator.
Before you use your air inflator, make sure that the mains voltage complies
with the specifications on the rating plate.
A guard or any other part of the air inflator that is damaged should be
properly repaired or replaced by an authorised service facility unless
otherwise indicated in this instruction manual.
Operating Instructions
1. PRE SETUP CHECKS
WARNING!
ENSURE THE
AIR INFLATOR IS TURNED
OFF AND DISCONNECTED
FROM THE POWER SUPPLY
BEFORE PERFORMING
ANY OF THE FOLLOWING
OPERATIONS.
PIC. 1
2. ASSEMBLY
Unpacking
Carefully unpack your air inflator. This air inflator is bulky and heavy, two (2)
person lift may be required. Dispose of all packing material in an environmentally
responsible manner.
Rubber stopper
For this air inflator, the rubber stoppers are already assembled.
Handle
For this air inflator, the handle is already assembled.
Air Filter
Carefully screw supplied air filter into the threaded hole on the top of the pump
head. This only needs to be done up by hand. Pic. 1.