DSA100 SPECIAL
Italian Hi-Tech Digital Stereo Amplifier
(Contents of Packaging)
•
DSA100 SPECIAL UNIT
•
A DETACHABLE AC POWER CHORD
•
REMOTE CONTROL
•
INSTRUCTIONS AND WARRANTY CERTIFICATE.
(Set-Up Instructions)
This section describes how to install the DSA100 SPECIAL Digital Stereo Amplifier. The instructions are purely descriptive
and necessarily generic. If you have any doubts or difficulties with this procedure please contact your local Blacknote
distributor who will know how to assist you.
-
Open all the cartons inside the main box and look that all the components listed are present.
-
Carefully remove the DSA100 SPECIAL Digital Stereo Amplifier unit from the shipping box and foam.
-
Connect the audio cable (not supplied) to the amplifier.
-
Connect the AC chord supplied.
DSA100 SPECIAL back panel
o
1) IEC standard AC plug
o
2) Fuse
o
3) Speaker connector (Binding post) RIGHT Channel
o
4) Speaker connector (Binding post) LEFT Channel
o
AMP IN - it is the direct power amplifier input.
The Power Amplifier Mode is particularly useful
to have a passive double amplification or to hook directly a processor, sub-woofer, etc…
o
PRE OUT - it is the direct preamplifier variable output.
The Preamplifier mode does not need
to be activated. The PRE OUT connection on the back panel enable the variable output stage
of the unit directly
o
RCA IN – Three unbalanced Line Inputs
o
XLR IN – One balanced Line Inputs
DSA Content of Packaging – Back Panel Features
4
