Blackmagicdesigngi Videohub Master Control Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 32

Blackmagicdesigngi Videohub Master Control Скачать руководство пользователя страница 3

Welcome

3

Welcome to Videohub Control!

Videohub Master Control and Videohub Smart Control are simple to install. We've extracted the relevant
pages from the Videohub manual so you don't need to read too much. All the information in this mini
manual can also be found in the Videohub manual.

We hope you share our dream for the television industry to become a truly creative industry by allowing
anyone to have access to the highest quality video.

Previously high end television and post production required investment in millions of dollars of hardware,
and professional SDI routing switchers have always been way too high in cost for most people to afford.
HD-SDI is even worse and until now, only the largest post production and television facilities could afford
HD-SDI routing. Videohub changes all that and even enables you to pipe 2K film around your studio just
like video. Now Videohub Control makes it even easier to route video using dedicated, broadcast quality,
hardware control panels that are also affordable. We hope you get years of use from it and have lots of fun
connecting everyone in your facility together!

This instruction manual should contain all the information you’ll need on installing your Videohub Control,
although it’s always a good idea to ask a technical assistant for help if you are not sure what IP addresses
are, or if you don’t know much about computer networks. Videohub Control is easy to install, however,
there are a few slightly technical preferences you will need to set after you install it.

We think it should take you approximately 5 minutes to complete installation. Please check our web site at
www.blackmagicdesign.com and click the support page to download the latest updates to this manual and
Videohub software including the Blackmagic Videohub Control Utility. Lastly, please register your Videohub
Control when downloading software updates so we can keep you updated when new software is released.
We are constantly working on new features and improvements, so we would love to hear from you!

Grant Petty

CEO Blackmagic Design

«
1
2
3
4
5
...
»

Содержание Videohub Master Control

































Отзывы:

Нет отзывов