Blackline Safety Loner 900, Руководство пользователя

Страница: 18 / 24

16 // USER GUIDE
Muster Alarm Light
A yellow LED on either side of the Loner 900 will light up if you are required to return to
muster or if Loner Bridge has received a text message at the Bridge that requires action.
About Fall Impact Detection
Loner 900 is constantly monitoring your motion for falls. If Loner 900 detects a fall impact,
it will enter the pending alarm mode and annunciate the low alarm pattern to indicate
a pending Fall Detected alert. If you do not require assistance, you have 30 seconds to can-
cel the alert.
Performance Expectations of the Fall Detection System
Loner 900 utilizes a accelerometer to monitor for sudden impact, such as a fall. Loner 900
may be configured to be worn on the belt or a chest pocket via the Loner Portal account.
Cancelling a Pending Fall Detected Alert
1.
Press the acknowledge button for 1 second during the pending fall detect alarm.
After one second, the alarm pattern will be silenced and Loner 900 will return to
regular operation.
v
If you have not cancelled the alert within 30 seconds, the Fall Detected Alert is sent to
monitoring personnel, initiating the alert escalation process. Loner 900 will annunciate
the high alarm pattern and will continue until the alert is cancelled or the battery is
depleted.
Silencing a Fall Detected Alert
1.
Press and hold the acknowledge button for 3 seconds. After three seconds, the
alarm pattern will be silenced and the Loner 900 will return to regular operation.
v
If the user silences a fall detected alert, this does not clear the alert within the Loner
Portal user account. Monitoring personnel are required to manage the safety alert
through resolution
About Checking In
Loner 900 can be configured in Loner Portal to have you periodically check in. During the
Check-in period, Loner 900 will enter the alarm mode and annunciate the pending low
alarm pattern to indicate a pending Missed Check-in alert. If you do not require assistance,
you have half the check-in interval to cancel the alert.
For example, if your check-in alarm is set for two hours, the Loner will enter pending alarm
at one hour and full alarm (if not acknowledged) after 2 hours.