manualshive.com logo in svg

BlackHawk Labs USB560v2, Руководство по установке

Поделиться
Скачать
BlackHawk Labs USB560v2 Скачать руководство пользователя страница 2

USB560v2-IG-01 

2

 

XBlackhawk USB560v2 System Trace Emulator 

Blackhawk USB560v2 System Trace Emulator 

 

Installation Guide

 

 

IMPORTANT IMFORMATION 

© 2012 EWA Technologies, Inc.

  All rights reserved. 

Reproduction, adaptation, or translation without prior written permission is prohibited, 
except as allowed under the copyright laws. 

 

EWA Technologies Document:  

  

USB560v2-IG-01

  

 

Warranty – this manual 

The information contained in this document is subject to change without notice. 

EWA makes no warranty of any kind with regard to this material, including, but not limited 
to, the implied warranties of merchantability and fitness for a particular purpose. 

EWA shall not be liable for errors contained herein or for incidental or consequential 
damages in connection with the furnishing, performance, or use of this material. 

About This Manual 

This document represents the Installation Guide for the Blackhawk© USB560v2 System 
Trace Emulator product (BH560v2).  The BH560v2 is a device that attaches to a personal 
computer or laptop to allow hardware engineers and software programmers to develop 
applications with DSP’s via their computer's USB or Ethernet interfaces. 

This guide contains some text paragraphs that are very important for proper device 
functioning and for preventing the BH560v2 device and target board from being damaged. 
These paragraphs are shaded as in the following example.  Please read each of these 
areas of text carefully. 

 

Related Documents

 

1. Texas 

Instruments 

CCSv4 Wiki Page

 (tiexpressdsp Wiki - Updated: daily) 

2.  To get the latest documentation from TI, click: 

Get the latest DSP manuals from TI

. 

Trademarks 

BLACKHAWK™ is a trademark of EWA Technologies, Inc.  All other marks are trademarks of 
their respective owners. 
 

Содержание USB560v2




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды