20
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 5: HARDWARE OPERATION
If the High-Definition signal is a Graphic Source (e.g. images, pattern generator, etc.), press the Video Mode button on the rear
panel of Receiver (RX) until “Graphic Mode” is displayed in the foreground on the graphic image. Set the MediaCento IPX 4K to
Graphic Mode to maintain the sharpest possible image.
FIGURE 5-2. GRAPHIC MODE
5.4 HOTKEY VIDEO CHANNEL SWITCH ON RX SIDE
In addition to pushbutton, IR remote and Web UI, you can also use a keyboard connected to the receiver unit to switch the video
channel in matrix mode.
Press “Scroll Lock” twice within 1 sec, and then type in the channel number to which you would like to switch the channel. The
channel of RX is switched accordingly. For instance, press “Scroll Lock” twice within 1 sec, and then type in “99”. The channel of RX
is switched to channel 99.
NOTE: The keyboard MUST be connected to RX’s USB port with keyboard/mouse symbol only.
NOTE: K/M over IP function of RX must be enabled.
