Blackbox Seal series, Руководство пользователя

Страница: 15 / 28

Connection with BT earpiece is indicated by beep and LED going dark on SEAL radio.
You are now ready to use your BT earpiece with the SEAL.
* If the SEAL does not detect a compatible wireless accessory within 60 seconds of being put into pairing mode,
the SEAL will exit the pairing mode and resume normal operation.
Battery Power (electricity demand)
With this function, the radio will report the battery power by audible indication: “Power High”, “Power Middle”,
“Power Low”, and “Please Charge Battery”.
High/Low Power Switching
You can set the power setting of each channel separately according to your work environment to maximize the use
of battery power. When set at low power, the radio uses less current, thus the battery operating time is prolonged.
High power is 5W and low power is 1W.
• You can select “Power Select” in “Channel Information” menu to set the power as high/low power of each
channel separately.
Monitor
This function can be set as (Top Key) / (Side Key 2) / (Side Key 1) using the programming software on the “Key
Settings” Menu. For operation, press the programmed key to hear a weak signal and to help you adjust the volume
when no signal is received. Press the key again to cancel monitor.
Sound Encrypt (Voice Encryption)
When this function is programmed, the transmit sound is encrypted. The other side needs to decrypt the
transmission. Otherwise, the sound received is noise or unintelligible audio.
1. This function can be set as (Top Key) / (Side Key 2) / (Side Key 1) using the programming software on the “Key
Settings” Menu.
14 www.blackboxradios.com