Blackbox LES1604A, Быстрый старт, Страница: 7 / 10

STEP 6 - Set NET2’s Network Configuration Method
The four Ethernet ports that make up NET2
are set to inactive by default. To activate them:
1. Click System > IP.
2. Click Management LAN Interface to make it
the front-most tab.
3. Click the Deactivate this network interface
checkbox to de-select this option and
activate NET2.
4. For Configuration Method, click either
the DHCP or Static radio button.
5. If Static, enter an IP Address and Subnet
Mask for the NET2 interface. For OOB,
set these for your management network.
For IP-passthrough, set these to match
an unused private IP range.
6. Click Apply.
NOTE: the Console Server’s firewall determines
which protocols and services can access which
ports and devices. HTTPS and SSH are enabled
to the Console Server itself by default. To change
access settings for the Console Server, and for
connected serial ports, click System > Services,
click the Service Access tab and adjust as
required
.