STEP 2 -
Installation
INSTALLATION STEPS
Take the cable KVM switch out of the box and
follow the steps below for installation.
1. Connect a monitor, USB keyboard, and USB
mouse to the respective consoles port on the
KVM front panel.
2. Connect the fixed KVM/audio and mic cables
to a computer’s connectors. Connect another
set of cables to another computer.
Installation is completed. Now you can operate
the KVM switch immediately.
NOTE: Some older computers with USB interfaces
might need to manually enable the USB option
in the BIOS settings before you can use any USB
devices. If your USB interface does not work, check
the USB option status in the BIOS.