31
CHAPTER 1: HEADLINE
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 7: RS-232 CONTROL
7.3.5 EDID MANAGEMENT
TABLE 7-5. EDID MANAGEMENT
COMMAND
DESCRIPTION
FEEDBACK EXAMPLE
EDID/[x]/[y].
The input [x] invokes built-in EDID [y]. x=1–5, 7.
y EDID
1 1080p @ 60 Hz
2 4K @ 30 Hz 4:4:4
3 4K @ 60 Hz 4:4:4
EDID/4/1
EDIDUpgrade[x].
Upgrade the EDID data of the input port [x]. x=1–5, 7.
When the command is applied, the system prompts to upload the EDID file (.bin).
Operation will be cancelled in 10 seconds. Disconnect the HDBT connection before
sending this command to ensure the data can be received successfully.
EDIDM[x]B[y].
Set the EDID data of output [x] to input [y]. x=1–2, y=1–5, 7.
Example: EDIDM1B1.
Feedback:
Input 1 EDID Upgrade OK By 01
EXT EDID!
EDIDMInit.
Reset the factory default EDID to all input ports.
All Input EDID Set Default
1080P!
7.3.6 RELAY CONTROL
TABLE 7-6. RELAY CONTROL COMMANDS
COMMAND
FUNCTION
FEEDBACK EXAMPLE
RelayON[X].
Turn on relay [X], X=1–2.
RelayOFF[X].
Turn off relay [X], X=1–2.
RelayAutomationCtl:[X],[Y].
Set the auto stop time of relay [X] to Y seconds. X=1–2, Y=0–20.
ToggleRelay[X].
Toggle relay [X], X=1–2.
