blackbox-av Solar Audio Post, Руководство пользователя, Страница: 12 / 18

12
1. Metal Solar Audio Post
2. User Manual
3. USB Programming Dongle
4. Mount Type
We supply the Solar Audio Post Metal with
either a plinth or in-ground mount.
It is very important to install the Solar
Audio Post where there is a good level of
sunlight to charge its batteries. Solar
Panels are installed on all four sides,
allowing the post to charge from all
angles. However, Trees and buildings
can have a significant effect on the
charge level.
(a)
You will need four suitable fixings with an
M8 thread to bolt down the Solar Audio
Post Metal onto your concrete (concrete
anchors not supplied). The only other
surface we recommend bolting on is
Asphalt but if the ground is firm enough to
accept your fixings you should be fine.
We would recommend using expandable
anchor fixings or chemical insert fixings. If
the installation area is unmanaged,
consider using security fixings.
Note: Ensure the installation area is flat
and has available drainage. Do not install
the Solar Audio Post in an area which is
prone to flooding.
(b)
When installing the In-Ground version of
the Solar Audio Post Metal, consult a
structural engineer on the amount of
concrete or post-crete required for the
installation location. You may need
permission to install on specific locations
like archaeological or scientific sites. Do
not bury above the base point. This helps
the post naturally drain of water of which it
could otherwise fill with over time.
(b)
(a)
Base Point