manualshive.com logo in svg

blackbox-av Director DVR, Руководство по программированию

Поделиться
Скачать
blackbox-av Director DVR Скачать руководство пользователя страница 18

 

16

Tutorial 5. How to programme the 8 internal sequence buttons. 

 
5.0  

Assume we want to enable buttons 1, 2 and 5 to allow selection of sequences 1,2 and 5 from 

sequence 00. This will disable buttons 3,4,6,7,8 whilst sequence 00 is running. We will edit the 
dvrloop1 sequence from tutorial 1 and insert the button 1-8 enable command at step00. 
 
5.1  

Open the dvrloop1 sequence from tutorial 1. 

 
5.2  

Double click on 00 in the ‘Step’ column to insert a new step at position 00. 

 
5.3  

Click on ‘WAIT FOR’ in the 'Event’ column and select Device = DVR, Command = SEQ 

BUTTONS. 
 
5.4  

The ‘Buttons 1-8’ window opens with the eight buttons unhighlighted. Click on buttons 1,2 and 

5 to highlight (i.e. enable) them. Click O.K. when ready. 
 
5.5  

Step 00 now shows SEQ BUTTONS 1-8  -00010011. The binary number at the end is a 

short-hand method of indicating the current setting for the buttons, button 1 is on the right button 8 is 
on the left and a 1 indicates the button is enabled. 
 
5.6  

Download this to sequence 00 in the DVR. 

 
5.7  

We now need to create 3 sequences to play in sequence 01, 02, 05 so that we can test the 

button operation. We will use simple 5 second pauses at different time points to distinguish between the 
3 sequences. 
 
5.8  

Make a sequence consisting of PAUSE at 00:00:11:00, WAIT FOR five seconds, GO TO 

SEQUENCE 00. Download this to sequence 01 in the DVR. 
 
5.9  

Edit the sequence to pause at 00:00:12:00 and down load to sequence 02. Then edit to pause 

at 00:00:15:00 and download to sequence 05. 
 
5.10   From the DVR menu, play sequence 00, which should loop as normal. 
 
5.11   With the hand controller switch set to ‘Sequence’ position, press button 1. Sequence 1 should 
play i.e. pause at 11:00 for 5 seconds and then return to Seq 00. The DVR front panel display will 
indicate the SEQ / STEP number as it plays. 
 
5.12   Experiment with the sequence buttons and you should find that from sequence 00 only buttons 
1,2 and 5 are enabled, however from the other sequences all 8 buttons are enabled. This can result in 
selecting sequence numbers that have no valid programme  - beware !!. 

Содержание Director DVR

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды