blackbox-av Audio Frame, Руководство пользователя

Страница: 6 / 8

www.interpretationshop.co.uk 5
1. Removing the Rear Casing
To change the configuration mode, you must
unscrew the 4 screws on the backplate.
Please see the diagram below for reference;
Please ensure the power is turned off when
changing the mode.
Changing Modes
2. Locating the Configuration
Switches
Once the case is open, you now need to
locate the configuration controller.
Next to the Power Input port, is a blue box
with white switches. These will be your
configuration switches used to change the
playback mode. It’ll look like the diagram
below;
Please refer to the previous page and switch
to a new mode.
Mounting the Audio Frame
1. Mount the backplate to a wall using the
provided VESA holes. The plate comes with
3 different sizes to suit your installation/fixing
area. Please use all 4 holes to secure the
Audio Point.
200x140
100x100
75x75
2. Once in place, fix the Front Plate back onto
the backplate. You will need to use the same
four screws you took out in the previous step.
UNSCREW UNSCREW
UNSCREW UNSCREW
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
2.
1.