Blackbird 42271, Руководство пользователя, Страница: 15 / 25

15
Following are some important notes about serial commands:
•
All commands must be terminated with an exclamation
mark (!). Any carriage return after the ! will be ignored.
• All spaces in the command are required.
• All response messages are terminated with a CR/LF
sequence.
• When all outputs are requested by a command, the
response will report each output on a separate line.
• The x, y, and z in the command are parameters.
•
The default option is bolded.
Output Commands
Command Description Feedback
r hdmi
stream!
Reports the HDMI®
LOOP OUT stream
status.
Enable hdmi loop
output stream
s hdmi
stream z!
Sets the HDMI LOOP
OUT stream on or off.
x=0,1 (0=disable,
1=enable).
Enable hdmi loop
output stream
Disable hdmi loop
output stream