3
Controlling a Third Party Device Using a Remote Connection
1.
Connect your PC and Third Party device to the system as shown in the diagram
below:
2.
Send the command 50788% to enable Serial Control Mode 2.
3.
Send your commands as desired, either for the Scaler/Switch or the Third Party
device.
PC
48V
LINE
IR EYE
IR IN
IR OUT
MIC INPUT
MIC
FIRMWARE
AUDIO OUT
L
R
RES RESET
RS232
Tx
Rx
L
R
INPUTS
OUTPUTS
3-HDMI
2-HDMI
1-HDMI / MHL
4-DP
5-VGA
HDMI
HDBT
CONTROL
DC 24V
IR OUT
IR IN
HDMI OUT
HDBT IN
Tx
Rx
HDBaseT Receiver
3rd party