Black BLK-HDC10M, Руководство пользователя

Страница: 10 / 25

4
SECTION 2: INSTALLATION
SECTION 2
Installation
The camera can be mounted on any surface the bracket can attach to. It must be mounted in an environment that is free of excessive
dust and moisture, and is continuously within the temperature range specification.
2.1 Camera installation bracket setup
1. Attach the camera bracket to the mounting surface using appropriate fasteners. The screws provided with the camera are
usable for many hard surfaces.
Mounting bracket
Gimbal lock knob Lock nut
Mounting surface
Ceiling mount installation Wall mount installation
2. Attach the camera unit to the mounting bracket (see above). Tighten the lock nut sufficiently to secure the camera to the
bracket.
3. Connect the HD-SDI connector on the back of the camera to a DVR or monitor with HD capabilities using suitable coax cable.
4. Route 2-wire cable between your 12 Vdc voltage source equipment and camera in compliance with local codes. DO NOT
apply power to the cable at this time.
5. Connect the 2-wire power cable to the camera and your power source equipment, observing the voltage polarity marked on
the power input terminals on the camera.
6. Apply power to the camera.