background image

SAFETY FEATURES
The System will not start the vehicle if the
brake pedal is pressed or the hood is open.
Also, if the brake is pressed or the hood is
opened while remote running, the remote
start will shut down.

REPLACING LOST OR STOLEN
REMOTE  TRANSMITTERS

This System can “learn” a maximum of 4
remote transmitters.To add a transmitter or
replace lost/stolen transmitters, please
consult with an authorized Black Widow
Dealer.

REMOTE START WITH FACTORY
(OEM) KEYLESS/SECURITY SYSTEM
To remote start the vehicle:

Press transmitter lock button 3 times.

• The parking lights turn on.
• Approximately 2 seconds later the

system will attempt to start the vehicle.

• Once the vehicle has started, the

heater or air conditioner (if pre-
selected) will turn on and run for the
pre-programmed time (12 or 24
minutes). If the engine fails to start on
the first attempt, it will repeat the
starting procedure 2 more times. If the
vehicle fails to start after a total of 3
times the system will shut down.

REMOTE ENGINE SHUTDOWN
If the vehicle has been remotely started and
you desire to turn the vehicle off, simply press
the lock button 3 times.

NOTE: Auto Cold Start Feature will not operate
on Factory Keyless/Security System.

*

Optional Feature

4

© DLC, Inc.,

65-550, 10/02

Содержание BW 550

Страница 1: ...e BWN500P Horn honk Trunk hatch release Window roll up Back up battery Additional sensors glass breakage microwave Starter defeat Siren or Piezo audible status Note Some features may not be appropriate for certain vehicles Automatic transmission and electronic fuel injection are required on vehicles for use with this system REMOTETRANSMITTER FUNCTIONS Button 1 Locks the doors and engages optional ...

Страница 2: ...nd trunk release will still function NOTE Remote Start feature maybe disabled during valet mode if programmed during installation To enter the Valet Mode 1 Be sure the system is off 2 Turn the ignition key on 3 Press and hold the valet service mode switch for 5 seconds The Lights will flash once The LED will turn on solid indicating the system is inValet Mode To exit Valet Mode 1 Turn the ignition...

Страница 3: ...T This feature allows the system to start and run the vehicle every one or two hours selectable by your installer for a period of 24 hours This allows the engine to remain at an operational temperature in extremely cold weather Engaging the Auto Cold Start feature To turn Auto Cold Start on 1 Press and hold the brake pedal 2 While holding the brake pedal down push the Valet switch and transmitter ...

Страница 4: ...smitter lock button 3 times The parking lights turn on Approximately 2 seconds later the system will attempt to start the vehicle Once the vehicle has started the heater or air conditioner if pre selected will turn on and run for the pre programmed time 12 or 24 minutes If the engine fails to start on the first attempt it will repeat the starting procedure 2 more times If the vehicle fails to star...

Отзывы: